home Fix label Household Appliances label_important Tumble Dryers category Hoover

How do I test the heater element for my Hoover HNC160-80 tumble drier?

After managing to replace the faulty on/off switch all was working well for a while. but now although the drum turns and timer works there is no heat.
How can I test the heater element to find out if it is this? I want to make sure I am replacing the right part.

Paul M, June 2017

home Fix label Household Appliances label_important Tumble Dryers category Hooverdone

You could always simply disconnect the heater and use a battery and bulb to make sure there's continuity from one end to t'other.

acp, June 2017

ive cleaned out all the filters, but the 'Filter Care' light remains on when on the heated part of the cycle, it goes off when it reaches the 10 min cooling section. I checked the element but it does not seem to be heating. Is this good enough to say its the element that's faulty?

Paul M, June 2017

link Click here to see other fixes for Hoover.

Fix Fault - Household Appliances

home label Household Appliances label_important Tumble Dryers

home Fix label Household Appliances label_important Tumble Dryers category Hoover

How do I test the heater element for my Hoover HNC160-80 tumble drier?

I can answer this question...

How do I test the heater element for my Hoover HNC160-80 tumble drier?

I can answer this question ...

How do I test the heater element for my Hoover HNC160-80 tumble drier?

How to fix lack of heated air from dryer?

Explain the code to fix it?

Bosch WTA74200GB Vented Dryer?

Reset button in tumble dryer?

How to put a belt on?

Error 55?

Miele WT2796?

How do I fit belt on Hotpoint Aquarius?