On the Fuel injection pump I have seen a fuel leak which is coming from a cap located in the middle of the high pressure outlets, at the back of the pump. I have checked the High pressure pipes and they are tight, although it is difficult to see into that area with the inlet manifold on. The cap looks like it may be screwed into the pump.

David Richardson, January 2007

with 15 mil spanner, take out the bigger plug on the affected pipe. with a 14 mil sucket take out the one thats dripping.
get ptfe from b&q about 53p wrap ptfe over the thread not too much and not too small, rub a bit of oil or grease and thighten. dont 4get 2 bleed.

austin d, April 2007

This may be the reason why your glow plug light is coming on!

MrMPuk, January 2007