the F10 keeps coming on after a few mins. the repair man last time said to re set the door swith as it had been getting opend mid cycle. Where is the re set button. thanks

Y Bissell, January 2007

i have a cdt80 dryer and the f10 code was flashing it ran for 25 seconds flashed f10 and no heat i took the back plate of (the cover on the back of the dryer) it has about 8 screws holding it on /inside that you will see the heating eliments and thermostats 2 screws hold the thermostats in look at the thermostats one will have a pin hole in the centre you need to push a pin in it and you may hear a click as the thermostat is reset hope this helps thanks

adam farmiloe, June 2007