how would i put a new belt on

riz, April 2007

this is a stretch belt difficult if u dont know how easiest way ,it may sound daft make sure applince is isolatedremove sides dissengage spindle of drum remove fan free back slip new belt reverse steps until only left panel is off then struggle 2 lever belt on 2 motor pulley replace panel

steve, April 2007

remove the lid then the control panel lay it easy on its back and then unscrew the front off by taking the bottom plate off you'll find some screws and they come out. Remove the front carefully and then you see the drum under the drum you'll find the motor this is where you need to stretch it over the drum and then the motor you'll have replaced your belt just go steady with the wires or make a note of where the wires go to

Tony, April 2007