Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

how would I fix my car after the timing belt going while in motion?

while driving my volvo 460 1.9td my timing belt snapped, will the valves be damaged and how do I go about finding out? at the time when this happened I was travelling about 20mph and did try to start it after stopping several times.
scott brown, February 2005
if its an interference engine it is more than likely that you have had piston to valve contact and bent your valves. your pistons may have also been damaged. remove your cylinder head to inspect the damage. If you remove your spark plugs and look where they sit in the head..you may find bits of metal which would more or less tell you that damage has occured.

Not a mechanic, December 2006
i think the valves will be bent and you,l be lucky if thats the only damage, the only sure way to find out is remove the head

pete, February 2005
link Click here to see other fixes for Volvo.