My machine has a mind of it's own. Sometimes wont fill, sometimes won't spin, fills up and won't stop, won't heat the water, heats up when it won't fill. Help! Any advice? Thanks, Louis.
more likely to be a circuit board fault try these guys
http://www.freewebs.com/cbrsleeds
phil grimshaw, July 2007
THE FIRST THING TO CHECK UNPLUG
TAKE OF LID & BACK AT THE TOP LEFT OF THE WASHER FROM THE REAR YOU WILL FIND THE PRESSURE SWITCH WITH A THIN RUBBER HOSE COMMING OUT OF THE BOTTOM OF IT
FOLLOW THIS HOSE TO THE BOTTOM OF THE WASHER
AND CLEAN THIS CHAMBER OUT AT THE BOTTOM.
OR IF YOU HAVE A STEAMER RUN STEAM DOWN THE TUBE AND THIS WILL CLEAN IT
