my bolen 31 cc weedeater runs too high when just sitting there idling...what are the right turns on both the low and high idle

Jimmy Hargrove, July 2007

I'm not exactly sure this will work for you,but it did work for me!

I used the principal as the same way you adjust the jet screws on a carburator of an old car!!!

Turn them both back to the starting position(just when they won't turn no more),then very slowly just turn each one a TINY,TINY,TINY bit,then stop and try to get it to run,after you turn them a tiny bit,then try it again,untill you finaly get it to run. If this doesn't work,you will have to find another solution!

Good luck and may GOD BLESS! MR> NEIL WILLIAMS

neil williams, July 2007