Carol asked ... How to remove roller from lawnmower?    |    Ariana Orellana asked ... Code?    |    Lynnie asked ... BT Studio 4500 cordless telephone?    |    David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Click here to ask your question

Dos screen sometimes doesn't fully start. Then is ok on restart?

A couple of time now my PC (FROM BEING SWITCHED OFF) has been turned on the black and white DOs screen with the yellow logo (phoenix or something) in the corner. Normally it just starts running, showing processor info etc. However a couple of time has just stuck on the first "paragraph" and not run. I have had to switch it off. It normally then just runs straight away. I have had no other "boot" style problems before, and last few days hasn't reoccurred. The only slight thing I have ever had trouble with on the PC is the on/off front switch has been a bit "sticky"... calling Geniuses!!

Any thoughts??

smudge.1969@hotmail.co.uk
Mark Smith, August 2007
It's not a DOS screen if it is showing Phoenix, it's a BIOS screen. (Phoenix write BIOSes.) So you need to look at your hardware. Could be the sticky switch. Could be something else - it's a matter of working you way through it.

t, August 2007