can any one tell me if i need a speceil tool to remove the big torc bolts holding caliper on or what size the torxs bit is cheers

martin, August 2007

If you have removed the brake caliper, there is a small grub [torx] screw that will still hold the disc in place, it goes from the external face of the disc throught it and into the wheel hub on ocasions I have had to drill the head off so as to get the disc off, and then fit a new grub screw.

riba-roja101, October 2007

T55 Size
I've taken off the caliper but the disk wont budge !!!

Any Advice?

Athy, September 2007