Knitmaster sc3 linker?

Knitmaster sc3 linker is jammed and doesn't travel across the bed


Brother Ribber Carriage KH850?

I dropped my ribber carriage KH850 from my lap onto the carpet and it is now not working properly. instead of gliding across the needles it is very stiff and it is dropping off all stitches going rig ... more


Brother kh900?

Is there a fuse in the brother kh900 as my machine doesn't light up when switched on.


done

How can I mend my Brother KX395 carriage?

a small piece of plastic broke in my Brother KX395 carriage, I took the 4 screws out and have put the pieces back together except a piece of metal with a v shape in the middle, can't find out where i ... more


How can I cast on with my knitting machine new needles?

I have just got my Brother KH840 out of storage after many years. I have cleaned it and it seemed to be working well but the needles were a bit rusty. Purchased 50 new needles from Amazon and replace ... more


Removing needles on KS 901 knitting machine?

I need to remove and clean the needles on the KS901. Following the instructions to remove the needles, I have gotten to the place where the needle is lifted at the back and removed EXCEPT there is not ... more


KH 260 Brother Knitting machine?

I am getting back to knitting on my KH 260 Bulky machine and trying out techniques with tuck stitches and the carriage is completely stuck. I removed the sinker plate but the needles are stuck and the ... more


done

Connecting problems?

Hi, I've just moved rooms with my machine that I haven't used for a while and now when I try to use the ribber the 2 carriages won't connect. It's looks as though the ribber isn't sitting high enough ... more


done

Brush check?

Toyota 901. Remove and check brushes


How can I mend my sewing machine?

Frister and rossman sewing machine. Motor is working but needle doesn't move


done

Frister Rosman cub 4 sewing machine?

my Frister Rosman cub 4 cable with foot pedal is now continuously running when switched on. In other words the machine does not respond to the foot pedal to stop. Any ideas?


done

Passap 6000e knitting machine has no display?

Hi I have acquired a Passap 6000e knitting machine that has been left unused for years. The rechargeable battery has been replaced and the console now makes some sounds but no display shows still c ... more


done

How can I send my brother KH-585 knitting machine?

My brother KH-585 knitting machine doesn't pick the yarn when am trying to knit please how so I make repairs


Holding cam lever stuck on my brother 965 knitting machine?

Holding cam lever stuck on my brother 965 knitting machine


Problems with 840 Lace carraige?

The lace carraige is jamming the needles. Please can you help?


Brother knitting machine 260?

What could be hitting when I move the caridge to the right


Toyota knit tracer k33?

Feed gears do not turn to catch sheet any one know how to fix this


Toyota k33?

Is there a manual for the Toyota knit tracer K 33 and where can I get one please.


Brother 950 knitting machine turned off and smelt of smoke?

I set up the machine, turned it on and after about 5 minutes it turned itself off and I could smell burning. Any help advice would be gratefully received.


Brother ribber 850- retaining bar not sitting correctly?

I am having problems with my Brother ribber 850 - my knitting carriage Brothern 950 works fine (I have put in new sponge bar). When Itry to cast on using the ribber I take carriage right to left but ... more