Should i change both filters on my JCB3cx?

Hi I am changing the hydraulic oil filter on my JCB3cx site master I Have discovered the is another filter inside in the hydraulic oil tank, The are both very dirty should the two of them be change

Error code E54 and HL for the 3 point hitch on Ford 7740. How do I fix it?

I can't figure out how to fix the error code E54 on my 7740 Ford tractor and it also shows HL in reference to the 3 point hitch. The tractor goes into neutral and will not move. Any suggestions will ... more

F44 error code on NH 8560?

Hi I have a new holland 8560 when I go into reverse or c range it goes into neutral and f44 flashes in a or b range. I have changed the petentionmeterrs and Calibrated but it's still the same. Mechani ... more

done

1956 fordson major torque specs?

Like to know torque specs for head bolts, rocker arm, and valve cover with two bolts on top only

done

7840 sle ford newhollnd Bd 51928?

lift not calibrating

8560 ,got code f3?

Have 8560 will not move its giving code f3

new holland error code e 11?

new Holland error code e11

fault code 3075?

what does code 3075 mean on a new Holland t4.120

done

how to replace broken mower height knob on jd x530?

i broke the mowing height knob on my john deere model x530 with a 54inch deck. I can't remove the old one and have no idea how to install the new one. Need help

allis wd 45 hydrolics?

when I attach my 3 point and brush hog I can lift and lower brush hog but as soon as I turn on the pto and raise rpm the lift will come up any suggestion

My New Holland 8340 SLE gear selection solenoids?

Could you let me know what each of the 4 gear selection solenoids actually do individually 1 to 4

how to fix problem?

8870 ford tractor code f203 and f204 eic error edc and tcm can comm. fault how to fix

done

problem with 7840 sle powerstar?

my low coolent light and buzzer keep coming on but the coolent is full

8340 sle ?

Bought a 8340 sle when changing gears light flashes on dash is this normal In them? And also error code e49 sometime appears on the dash what is this or how to fix it? Thanks

new holland tn95fa?

I am getting the fault code 425...What is it?

2670 kubota starts and run but push the pedal to move it dies?

I removed the seat and rear fenders unhooking the wiring to the seat and rear light. plugged everything back in. tractor starts runs great but when I pust the pedal to move the tractor it dies. do I h ... more

fault code 2335 in 6080 new holland?

just bought a new holland 6080. it has stopped moving forwards or reverse. its throwing up a code 2335 does anyone know what this is?

error fault 49 on tn90f new holland?

on I-lo/power-shuttle flash 4 fast 4 slow 9 fast

jcb 520 -2 loadall?

How do I fix load indicator on a 520-2 jcb loadall ,the light flash all the time and buzzer stays on ,how do I set it up cheers Dan

Dc95 new holland dozer?

The dozer wants to track to the left won't move forward but it will track straight in reverse. The menu is showing a fault code 4533 F what does this fault code mean?