Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

My sportcraft tx4.9 runs fine then suddenly slows down, help?

Hi, I've been trying to find answers online and haven't had any luck yet. I have a sportcraft tx 4.9. I will walk slow for about 5 min. and ease my way up to 4 mph. Sometimes it takes 10 minutes, sometimes it takes 20 min. then it starts to slow way down, if I speed it up, sometimes it will kick in (too fast for me) then other times I'm frustrated and I'm done. Any suggestions?
Frustrated Paula, February 2008
You need to lubricate the walking platform between it and the walking belt. The heat from the moving belt is causing to much friction. I had the same problem and called Spotrcraft. Use 100% silicone oil and use a couple of ounces to make sure it is well lubricated. Put the oil across the top under the belt so it will spread across the platform. Fixed mine right away. Good luck

Rick M, April 2008
If your belt and deck are worn or need lubricant, it can slow down and also cause motor damage. Run the treadmill longer than you walk without walking on it. If the speed stays constant with no one on it your belt and deck are worn or need lube.
See my video on treadmill maintenance at www.mindbites.com/person/214-Mark

You can get my e-mail there also.

Mark Peterson, February 2008
link Click here to see other fixes for Sportcraft.