Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

How can I fix my Beko WMA10W Washing Machine?

Every time my machine goes into spin it makes a knocking noise, a bit like the drum inside is banging on its casing, all the springs and dampener arms are in place and taught and I just dont know what to do.
Kerry, February 2008
my beko washing machine washes fine and spines but leaves water in the cloths,even if i set it to drain,spine or rise it still leaves water in the clothes. how do i fix this problem. thanks

Eve, February 2012
it sounds like the drum bearings might have gone
take the back off and remove the drive belt and rock the big fly wheel on the back of drum if there is play in the bearing then replace

replacement parts from www.espares.co.uk (separate parts)
www.diy-spares.com (complete kit)

chris, April 2008
tighten the bottom concrete counterweight to the tub as it is a common problem.do it now or it will break off the drum and completely ruin machine!.lay the machine on its back and you will see concrete weight at top left fastened (use the term loosely)to plastic tub.tighten 13mm bolts X 2 and retest .should be alot quieter.

ck, February 2008
link Click here to see other fixes for Beko.