David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Click here to ask your question

How can i fix my Miele w526?

The red lights check outlet/drain are flashing on my miele w526 washing machine, how do i fix it
Mrs Luckey, June 2008
Paul solution works well also in a Miele W2104

Tomas, March 2011
En mi lavadora Miele W2104 tambien se encencian las dos luces de "Comprobar la entrada de agua" y "Comprobar desague". Eso pasó después de que limpie el filtro de desague. Segun el manual = llame al servicio tecnico = 100 euros.
Con la solución de Pablo, inclinar la lavadora hacia mi, la bandeja de seguridad se vacia y la lavadora vuelve a fundionar sin llamar a nadie. Graciassss Pablo.

Tomas, March 2011
all that was needed to reset this problem was to carefully lean the entire unit towards me. use plenty of towels to soak up approximately 0.5 litre of water.

Problem fixed

Paul, November 2009
i think i have the same problem.
the " check inlet & check drain" lights are both flashing.

a possible cause from the manual suggests "the water protection systems has been activated"

the remedy" once again from the manual is "Call the service department"

however at £90 just for a call out makes me want to explore other answers 1st.

The Miele Water Protection system has 3 main
componants;

1. the inlet hose
2. the electronic unit and the washing machine housing.
3. the drain hose.

any ideas would be gratefully received.

Paul

Paul, October 2009
check and clean filter, check pump operation for seized impeller or blockage,may require new pump

wirecutterman, June 2008
link Click here to see other fixes for Miele.