What is the choke position, half choke position,run position on a Poulan Pro 31cc gas line trimmer? Also,when you put line on the spool do you take the line ends out of the two notches before you run the end of the two lines thru the holes on the spool?

William M. Bailey, June 2008

Take off the back cover[where the starting instructions are printed]this also holds the air filter,when you move the choke lever you can see the choke plate open and close.
The line needs to be in the two notches,then threaded thru the two holes before you close the line cover.After the cover is closed pull on both ends of the line to pull them out of the notches before you start the engine.

Jim S., June 2008