David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Click here to ask your question

i have a iron burn on my pants?

Iron burned my pant was to hot. pants is made of 50%polyester and 50% rayon
terry, September 2005
No matter what method you try, your pants are ruined anyways, so it couldn't hurt. I suggest using a propane torch to set it on fire and put it on your neighbors door step. Wont help your pants any, but it'd make for a good laugh.

Jamie, March 2011
i tried the sandpaper .. it ruined my pants completely!

Gwenne, March 2011
throw it

kicker, November 2010
Sandpaper totally worked.

Justin P, April 2010
I tried the sandpaper trick and it worked! But be very careful to use fine sandpaper or you will damage the fabric.

julie, July 2009
use a very fine piece of sand paper(dark clothes) 200grid or higher gently scrub the area, the shine comes off dont scrub to hard

erik, November 2008
Iron the other side and start a new trend!!!

regina, August 2008
people say rub sliver jewelery but i aint toooo sure

Abbi, September 2007
Treat the burn with stain remover.Scrub the burn mark.fill the sink with cold water,washing powder & bleach.Mix the water really well, leave in sink for 20 minutes.Scrub it again & rinse. Put in the wash, then dry it. I found this on the web at www.ehow.com, my wife is just about to try it on her pants.
Good luck.

Mal, November 2005