I have a G Plan recliner chair & the cable has pulled out of the niple on the handle end, could you please help me

Ron Clark, October 2008

Hi you could fit a new cable finding one a bit of a prob but I found the best option was to solder on a new niple, the cable is long enough I used a brass terminal from an electrical block conector I cut it off filled to rough shape then soldered (use plenty of flux) then fillled off to shape, did it in 2007 chair still working.

Peter-W-Fisher, November 2008

Contact a retailer, they should be able to order spares, they are straight forward to fit.

Bridget, October 2008