2 hours ago Pekaye asked ... Clutch Cable change?    |    3 hours ago Richard asked ... Mountfield SP414 mower, revs too high?    |    Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Click here to ask your question

how can i fix my beko washing machine?

i have a beko washing machine wma 10 w the problem started with when i put on a load of washing it would jump through the dial and if i put on a light wash it could end up as a strong wash, now the amchine wont start at all when i try to put on a wash
amanda, December 2008
BEKO WMA 10 W THE PUMP WAS JAMED AND NOW IT STOPS IN MID CYCLE

R Lakey, January 2009
these machines suffer from a few diff faults that would cause this type of fault i would 1st check the motor brushes if they are worn the prog will skip. If these are ok i would sugest changing the programer and module as these are a common cause of this fault.

Colin, December 2008
link Click here to see other fixes for Beko WMA10W.