SWITCH OFF POWER AT MAIN SUPPLY.
Carefully remove the entire back cover.
DON'T LET THIS COVER FALL! THERE ARE MANY WIRES THAT WILL BECOME DETATCHED.
Pull off the 3 terminal wires from the element spades terminals.
YOU DO NOT NEED TO REMOVE THE OVEN DOOR.
Open oven and undo 2 screws holding the fan cover plate at the rear of the oven. Just lower this plate down and remove the 2 screws holding the round heating element in place.
USE A FLASHLIGHT TO LOCATE THE ELEMENT FIXING SCREWS.
Withdraw Element.
TAKE CARE NOT TO BEND THE FAN BLADES.
Place new Element in position and screw into place.
Reassembly is simply a reverse procedure.
Some sharp edges and greasy metal to take care with.
Gloucester Fella, March 2010
