Pekaye asked ... Clutch Cable change?    |    Richard asked ... Mountfield SP414 mower, revs too high?    |    Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Click here to ask your question

washing machine indesit wil 103?

machine will start cycle then stops then it makes the sound of starting to wash but drum not moving then the red lock button and delay timer and easy iron buttons flash together and the drum feels loose has a belt come of due to overloadig thanks.
martin phillips, April 2009
My indesit wil 103 will not start. The LED lights are on but the start button will not turn on and three green lights are on. Can you help please?

steff, December 2009
I have the same problem on an Indesit wil103. My machine is only about 3 years old.

I tried all the suggestions of unplugging it and leaving it before starting it again after 3 hours. I also tried to reset the programme, using the on/off switch and the programme dial.

I have found other sites with several ideas for this machine.

I have left it for a week and then tried it and it started as normal today but shortly after the same flashing lights began again.

After spending a week reading lots of similar posts on the Internet I have resigned myself to buying a new one (not an Indesit, maybe a Bosch). Some posts say it is the pressure sensor some that the fault is the main control panel (mainboard?) which is £200 to replace!

LallyF, April 2009
link Click here to see other fixes for Indesit WIL 103.