David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Click here to ask your question

bubble in my floor?

Help plz, I laid a laminate wood floor, and abt month later a big bubble appeared ( 2 x 5area). So i took off all the trim to see wear it needed more room to expand, found and fix. all good to go, so i thought then it came back, same spot same boards, re took the trim off and found nothing, room all around the edges for it to expand!!! Boy am i confused and frustrated!! HELP????
confused, June 2009
get a waterproof underlay, they are normally silver on one side, lay silver side face down. this should stop the moisture. ive found the floors expand nowhere near the 10 to 12mm gap your supposed to leave, even in conservatories, so problem is prob moisture.

chris, July 2009
The majority of the problems I have encountered with laminate rising is caused by moisture under the boards trying to find its way out. I would suggest lifting the affected area of the floor, AND the underlay in the same area, and letting the air get to it for a day, then relay the boards, or if possible replace the warped boards with new ones.

carpetman, July 2009