Dave asked ... Toilet Push Button not flushing properly?    |    Dave asked ... Repair kettle lid?    |    Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    Click here to ask your question

home Fix label Power Tools label_important Drills

change chuck ?

how do i change the chuck on my worx WX7HD drill 710w (hammer drill)
john hendry, July 2009
home Fix label Power Tools label_important Drillsdone
Just a thanks to the person who sent me the information I required. It was correct and I have now changed the chuck!!

John Hendry, July 2009
dont know about workx but usual is to open chuck fully lookinto and remove screw from bottom with phillips screwdriver need a vice. note screw is a reverse tread so turn to the right. next place chuck in vice and use a 17 spanner between chuck and drill housing to unscrew chuck itself should just screw off new chuck should come wit screw and chuck key

ciaran, July 2009

Fix Fault - Power Tools

home label Power Tools label_important Drills

MacAllister cod 144v l10 drill?

Power Tools > Drills

Power Craft Bench drill DP500?

Power Tools > Drills

Hilka drill?

Power Tools > Drills

need a new battery?

Power Tools > Drills > Challenge

Chuck repairs?

Power Tools > Drills > Powercraft

Makita 6408 drill chuck?

Power Tools > Drills > Makita

help on programming stations on DCR018 radio?

Power Tools > Drills

challenge drill?

Power Tools > Drills > Challenge

Fix Fault - Power Tools

home label Power Tools label_important Drills

fixfault.com

fixfault.com for free repair help, information and advice.

How can I fix my Geller SX-580?
How can I fix my DAF CF55?
How can I fix my Scantronic 9651?
How can I fix my Ford S-MAX?
How can I fix my Sony PS3?