Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Joan Sorrentino asked ... Barcalounger issue?    |    David asked ... Not starting until I bang door closed?    |    Click here to ask your question

my 2.0 eco tec cavalier runs rough and sometimes stalls when at junctions ?

my2.0 eco tec 16 valve cavalier runs okay at higher speeds but rough sometimes stalling at lower revs i changed the idle control valve it made little difference plugs are okay can you help me thanks
john, October 2009
hi this is a common problem .most times all i do is take off the air intake pipe to the throttle body ,u will see a round disc called a butterfly .which as u press accelerator opens up . this gets carboned .or oiled up , get a can of carb cleaner from yor local motor factors and clean it ,then make sure its held open and clean as far as u can inside it ,,watch out they can be very sharp .u can also use brake fluid ! but be carefull not to get any on yor paint work ! hope thats of some help to you

ade, October 2009
link Click here to see other fixes for Cavalier.