Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

Baxi 105E Combi Boiler (18 months old only), continuous ignition failures?

What's the cause ? Symptoms:
1. Flame failure after 5 - 10 minutes, followed by:
2. Failure to be able to reset (sounds like a solenoid is being energised, followed by relay tripping out
3. The 'flame failure' and 'fan failure' fault lights coming on.
Chris Sherman, March 2006
Without being stood infront of it and watching its difficult to give an accurate suggestion to be fair. From what you are describing it could possibly be a fault on the heating thermister as I have had this once before but cant remember which fault lights it displayed on the front for the life of me. I am pretty sure though that it tells you the fault codes on the drop down panel on the front of the boiler. iirc it was listed as a sensor fault.

HTH

Andy the gas man, March 2006
link Click here to see other fixes for Baxi 105E.