The red light is constantly on on my machine we have done the cleaning proceedure at least 10 time but the red light is constanly on. the machine work okay but the light is always on
Lift lid plastic their is a red plastic window at front this reads the bar code off the pod . Clean plastic window with damp cloth. This should do the trick
Jim shaw, March 2017
I had the same problem. But the machine wouldn't work at all. I got the red light beeping and the green on nothing happens. I messed with the machine in the back water con rarer part there is this little black disc that sinks when there is not enough water, when there is it floats to the top. The machine is telling me there is no water when I fact it's full the disc apears to have rissen to the top but don't work I reach into the water contarner and push it up it works fine. I don't know why it's doing this but I'm just going to rig that floating disc up so it remains in place. If you have the same problem give it a try. Just thought I'd share.
Darryl, July 2015
hi if my tassimo coffee machine is giving out cold water on all cycles how can i fix this please
daniel, May 2014
yes red light stays on......
idont know where to buy a cleaning disc.......
I appreciate your input........
thanks
len cameron is my name, March 2014
yes red light is still there
where do I get the cleaning discs
len cameron, March 2014
Its still on wot now
Teresa, March 2014
I ran the descaler - held button for three seconds and it ran. Now, it won't work when I put in a coffee pod. No green light. Any ideas?
mcaleadi, October 2013
to de-scale do you require any addatives? I have just put the disk in held button for three seconds and left it run it's course with green and red light flashing.
lost my instruction book, August 2012
When I turn my unit on all the lights flash and won't do anything.
Bruce, May 2012
once you put the yellow/green descale disc in you must hold button for 3 seconds then both green and red light flash as it descales
bee, May 2011
You are wrong thunder monkey, mine stays on after carrying out the correct descaling procedure
Steve, January 2011
If you isert the cleaning disk and hold the button for 3 seconds it will descale. Thus causing the flashing red light to go out.
