Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

husqvarna 266xp starts but won't reach full speed?

My husqvarna will start but sputters and will never rev up and dies out after the trigger is released. What can cause this problem?
Ray Duvall, April 2006
THE SCREEN IN THE MUFFLER IS PROBABLY PLUGGED. THIS SAME THING HAPPENED TO ME AS WELL. I THOUGHT THE SAW WAS RUINED, BUT IT WAS JUST A PLUGGED SCREEN IN THE MUFFLER.

GOOD LUCK

ORDROCK, December 2008
Check yoyr fuel filter which is located in the gas tank, most likely it is clogged. They are cheap tp replace and should be part of yearly maintanance.

Kane, December 2006
Check the muffler to see if it's plugged up. A plugged muffler will cause backpressure in the crank case which will prevernt the carb sending enough gas to speed up the saw. Too rich an oil mixture will do that to the saw; plug up the muffler. Remove the cover and clean the holes in it.

M14E2, December 2006
link Click here to see other fixes for Husqvarna.