Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Kurt asked ... How can i mend my Aiwa HV-FX7700K?    |    Laetitia asked ... Toyota overlocker model 3400 D?    |    Click here to ask your question

Ferguson FRG-R121D/A Radio?

Bought in Twickenham, for father living in Heathfield Sussex. December 2008. DAB never worked (Does DAB work in Heathfield?) FM has now packed up too; on-off switch a bit dodgy. And it has the BUZZ!
Steve Cobb, January 2010
Just done one myself, there was a 3rd cap with a very high ESR (resistance) which needed replacing. Now works a treat.

Mikcatta, October 2014
I have replace the 2200uf cap. between the two plugs/sockets on the Audio pcb and now the FM works fine, with a small amount of background hum, so I may also replace the 3300uf cap., but there is no sound from the DAB band, although the display and tuning seem to work as normal. Would replacing the 1000 & 220uf's mentioned by John cure this problem, or is there another possible cause?

MikeG, February 2013
Just wanted to say a big thank you to Peter Saunders! Followed your instructions and now we have a working DAB radio again all for £2.98 for 2 capacitors (inc postage) from http://www.bitsbox.co.uk. You da man!!!
Thank you!

Chris, January 2013
hi, i changed both caps but still have hum?

paul, December 2012
how to remove radio aerial which prevents back from coming off

catpalmac, July 2012
Instruction manual can be found here:
http://www.partmaster.co.uk/company/partmaster/manuals/Ferguson%20FRGR121D.pdf

Trickyd400, September 2010
I have repaired 6 of the ferguson frg-r121d dab radios.The commonest fault for mains type hum are 2 electrolytic capacitors in the power supply mounted on the audio output pcb.1 is a 3300mfd 25v.The other is a 2200mfd 10v which is in between the two plug and sockets from the mains transformer.I can repair this fault for £20 including parts plus postage if required.
regards peter Saunders.

Peter Saunders, September 2010
If you've still got the radio the fix for if it does not power up is to replace the capacitors 1000uF and 220uF on the board just behind the display. Either or both dry out and affect the power rail - I have two of these radio's both failed the same way - both now fixed although I have an intermittent fault on DAB on one. Suitable capacitors can be bought from such as Maplins (you can have higher voltage and temp rating no problem - but can sizes will be bigger.

John, August 2010
where can I download an instruction manual

farnsworth, July 2010
link Click here to see other fixes for Ferguson.