Chris. asked ... Miele W800 novotronic washing machine?    |    Larry asked ... How to stop my steam iron from leaking. Model dw2463 Rowenta?    |    HT asked ... Radio code Philips 22RC200/35?    |    Roberta asked ... DW5080?    |    Dave asked ... Toilet Push Button not flushing properly?    |    Click here to ask your question

How to set up to receive signal?

Workmen accidentally broke the receiver in front of the dish and had it repaired but still unable to get picture so was wondering what the secret of tuning it it is?
Thank you
Di B, February 2010
if the dish is back to the way it was? and has just moved out of line"if you can see the tv through the window,or if you can put the tv near the window, were you can see it"it will help you to get the dish back in line with the satellite, without a sat finder" so have the tv and the sat box turned on ,it will say no signal on the tv , if there is another dish on the next house . try keep it pointing is the same direction, as them , just use very little movements at a time when lineing it up the dish , as you look at the tv , you may see a program flashing in and out on the tv , as you pass the signal, from the sat, also you do not need to point the dish back to much . keep it up right, just rember just very small movements with the dish , when your lineing it one inch" at a time , and make sure everything is ok , on the arm . with the LNB , on the end of it, and the cable is in it tight,

mick, February 2010