Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

Does anyone know how to reset the alarm on wireless thermostat receiver?

I desperately need help...3 years a go i had a new heating system installed with Britsih gas.

Yesterday i noticed the temperature in the house to be really hot despite the thermostat showing the heating was off. The strange thing was the radiators were all hot.
I went to the boiler and noticed no green light on the wireless receiver box, so i checked the fuse to the mains which powered the receiver and both the green and red alarm light was lite.
I have no control over the heating and despite trying the most lodgical things like changing the batteries in the thermostat and trying to reset the receiver box, unfortunately neither resolved the problem.
British gas want to charge lots of money just to come out and god knows what else on top when they get here.
If this problem can be resolved by me then i would atleast like to try. Any helpful suggestions will be gratefully received.
Jane Bridle, March 2010
it's unlikely that the stat is at fault, they usually fail to the off position. more likely that the flow switch for the water is stuck on or a faulty diverter valve. try turning the heating temerature control on the boiler right down, if heating still on then fault is not the stat

Ian, March 2010