my saw is getting spark and fuel but won,t start
it is wetting the plug and barrel alot

john, May 2010

If this does not work remove the two muffler screws and check the condition of the piston through the exhaust port, any damage ( scuffing ) here and the saw will have to come apart to assess the damage.

Husqvarna man, May 2010

you must have flooded it , by trying to start it to many times . try burning the spark dry , by pull starting it with it swiched (off), you should see white smoke, try this for 7 + pulls , then turn it on , and try it as normal , but put the choke on , till it kicks" knock off the choke. when it kicks , and pull start it as normal , good luck .

mark, May 2010