I have been attempting to add an X/Time key, but the two function key tables I've tried have an incorrect code. Neither code 46 nor 56 (listed as the x/time key code in two different programming manuals) works to program the key. Code 46 programs the Mod 4 key. Frankly, I can't remember what 56 did. I have tried 0 - 100, but can't find the correct code.

Lisa Gambrell, July 2010

think correct code is 46 (key at s posistion enter 20 st 46 press key posistion & then press same key posistion again to activate.)or if all else fails you can install default keyboard (caution all keys will reset) x/time is above number 9 digit if pressed will lock machine showing date & time nothing will cancel this apart from pressing x/time again to clear.
Turn key to S-Mode. Unplug the register, hold down the second key up from the lower right key on the
keyboard, while holding down this key plug the register back in. An install default keyboard receipt is
issued.only use this if all other options fail.

Dave (Wigan), August 2010

Actually, 56 is the correct key code for the X/Time key. Is your register a 6500 or a 6500II? When you program a key as key code 56, how is it behaving that makes you believe it is not an X/time key? What are your settings for system option 11? Post again with answers and I'll see if I can help track down what's going on.

Steve, July 2010

Those are the two key codes for the 6500 and 6500II so I'm not sure why you can't get the code to work, especially if you have tried all codes up to 100. It sounds like you may have a special firmware version in this machine. It would be best to consult a local dealer as they may have the details on the variant. if you are just after a key code, they will usually help over the phone

Registerman, July 2010