Pekaye asked ... Clutch Cable change?    |    Richard asked ... Mountfield SP414 mower, revs too high?    |    Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Click here to ask your question

how can I open the door on my jlwm1203?

Just out of warranty. 1 min from end of cycle an E20( I think) came up & as cycle won't finish I can't open the door to get my bedding out!
I have tried using a hairdryer around the pipes in case of freezing as -9 last night.
rachael, December 2010
stuck with 1 min is usually a door interlock fault
E20 is a no drain issue and could be related to the filter at the bottom right or something frozen up if its in a cold area.remove filter and check with a torch that the impeller rotates freely and isn't jammed
turn the appliance off at the wall and wait 5 min.with the palm of your hand hit the door around the handle area 3 or 4 times and then try opening the door.if this releases the door the door lock is at fault and needs changing

ck, December 2010
link Click here to see other fixes for Whirlpool JLWM1203.