I have just had a new clutch fitted which involved disconnecting the battery. When i drove home I found the "Fiat" radio was not working and the display was blank regardless of what I tried. Have checked fuses in fuse panel and at rear of radio and both ok. Checked and there is power to the radio but still no display. Any ideas what may have caused this problem through just having the clutch replaced? Without the display I cannot enter the security code. Is there anything in the radio I can do to fix the problem?

Norfolk Alf, January 2011

try disconnecting for ten mins then plug back in.
then leave it turned on for a bit see if that will sort it
Please note that code entry is only possible when "CODE" is shown in the display. If the display continually shows four lower bars " _ _ _ _ " then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.

hay88, January 2011

Model is a Fiat/ Philips 22RC200/65 fitted in a 2001 Fiat Ulysse

Norfolk Alf, January 2011

what's the model please

hay88, January 2011