katlego asked ... Rev count on my 1982?    |    andrew asked ... "SECURE" on a yellow backround, and I cant ge?    |    Melodie asked ... How do I remove and change the basket? Duratech Identity Gu?    |    Kathy asked ... Samsung ER-4915?    |    Mark asked ... Oven door removal?    |    Click here to ask your question

glow worm 24ci?

The pressure seems to be stuck at 0.4 and is flashing. I know it needs to be at least 0.7 but don't have a manual. Can anyone explain how I can increase the pressure and why it fell in the first place?

Thanks
Rob Draper, September 2006
The Flow Control Valve is dripping. Boiler 5 years old. Could it be the O rings need replacing or is this a common fault needing control valve unit replacing? Any ideas where I can get replacements (the O rings are buggers to match up with anything at local plumbers merchants)

Mongo, January 2009
if the pressure reading is less than 0.7bar, re-pressurise the system to 1bar by gently opening the blue built in filling tap underneath the boiler. close the tap. If the system repeatedly loses pressure, contact your installer/service provider

Kellie-Nina, December 2007
Rob, there is a system filling device on the front right, you need to turn it clockwise and it should fill the system.

James, October 2006