hi, the blower inside the car just stopped blowing, i have the dash apart, no power at the fuse, no power at the switch. ive tested the switch and it works fine on all speeds. when i put a live feed to the fuse it works as it should. so where should i look for the problem?
thanks for any suggestions

r lock, July 2011

what happens with feed to fuse is that the solder around fuse holder blade cracks around pin on pcb, you may need a magnifying glass to see it,but if you are very careful you can remove all parts on fuse box [with it out of vehicle] making sure you have made a diagram of where they all fit.carefully detatch outer covers to get to the blade and re-solder it -have done this on several occasions with 100% sucess.

k, July 2011