Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

how to fix my BAXI INSTANT 105E?

system is 4 years old. problem is the heating will not come on, i only get hot water. main boiler pilot light comes on when switching system on from cold, system temperature climbs to 80 degrees on the flame failure neon after about a minute it cuts out. flow pipe is hot about a foot from the bolier and that is it!
recently had diverter valve replaced as corrosion in one of the threaded joints caused a leak.
phil spillane, September 2006
You need a new pump by the sound of it.

Dave Notts, October 2007
Did you manage to fix the boiler as I have a similar problem?

Craig Crawford, December 2006
could have coused a blockage in the system pipework try flushing the whole thing out.

tony joint south wales, October 2006
link Click here to see other fixes for Baxi 105E.