The 'final rinse' light stays on and sounds beep when wash cycle is over entering rinse cycle. Also the row of lights from wash to spin flash when power is off. When it did work, it wouldn't correctly fill low or medium level of water and when it finished a full cycle it would instantly start a new cycle and fill with water again if I don't stop it manually by turning the power off.

John Fair, August 2011

Sounds like a faulty main control board. Try turning power off at wall and pull out the power plug. Leave out for 2 minutes then plug back in. This should reset the recycle mode which it is in at the moment, that is why it restarts the wash cycle again. If the right hand lights on top row keep flashing when you put power back on then you will definitely have to fit a new control board. The final rinse light on is an error code which also points to a faulty control board.

Lincoln Appliance NZ, August 2011