Gardenline 16 Chainsaw GCS-2000 Art.No KZM6003

Every time I press the on switch it blows the trip switch, its been check on different circuits so its defiantly the
saw

John Churchill, October 2011

if its tiipping main consumer box ie-the big switch ,then check all wireing for shorts ,you may have nicked the cable accidentally,if all looks ok then you will have to pull it apart /wireing/switces /motor.if its tripping the small moduels ie downstairs plug sockets,then its most likely to be due to moisture .

killerdanny, October 2011

i would check the plugs and cables you might have a break in the cables check this with a digital volt meter does your saw plug into an extension check it to or try another extenstion

j docherty, October 2011