Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

bosch exxcel 1400 spin not removing enough water?

the spin appears to run at top speed ,but after spinning twice still leaves clothes to wet.spinning in an old 1200 spin machine is a big improvement
muriel, January 2012
It appears you have a partal blockage.Located behind the front kick panel is a filter inspection cover.Remove the cap and the filter.Clean out any debris.Make sure nothing is stopping the pumps impeller from turning.Put the machine on SPIN ONLY and look into the filter housing.The pump must be running.If all ok,reassemble and try.If it doesn't solve the problem,you will have to remove and inspect the blk rubber hose between the drum and pump and inspect for a blockage.If you have small children have you lost a sock?.

paul, January 2012
link Click here to see other fixes for Bosch.