hi i have an idesit condenser dryer IS70CS its heating up fine but drum doesnt turn.belt is still fine helpppp plz x

tracey, January 2012

hi paul,thanx so much the drum turns easily by hand,and i can hear the motor.should i buy a new dryer!!:( x

tracey, January 2012

If you can turn the drum with little or no resistance,and the belt is routed correctly and intact.You would assume either a problem with the motor or associated wiring .If you can hear the motor running then you have a problem with the belt drive...That's the belt you have already checked..A thorough investigation is needed.

paul, January 2012