John asked ... Scantronix 9450 box stuck shut?    |    Pekaye asked ... Clutch Cable change?    |    Richard asked ... Mountfield SP414 mower, revs too high?    |    Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Click here to ask your question

how can I fix my dishwasher?

It will not fill with water. There is no mains to the solenoid to release the valve to let the water into the dishwasher at the beginning of the cycle. the display works ok. Is there anything else it could be other than the processor board?
bob, March 2012
Anti flood switch or broken wire from control down to inlet valve or wire from other side of valve going to neutral.

Lincoln Appliance NZ, March 2012
depends what make and model we are talking about.ALL dishwashers are not the same.Antiflood base float switches sometimes stop power to inlet valves

ck, March 2012