Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

Fisher & Paykel 920 drain pump keeps running?

When my Fisher & Paykel 920 dishwasher is switched on at the power pont the drain pump runs even though there is no water in the machine. When appliance switched on display shows 73, won't run and drain pump keeps running. Capacitor is OK (tested)
Paul, April 2012
No problem. Good result.

Lincoln Appliance NZ, April 2012
Thanks, waited 60 secs and it stopped!!! Didn't wait that long before as I knew there was no water in it and didn't want to run the pump dry

Paul, April 2012
Drain pump will normally run for approx. 60 secs then stop. Have you waited this long? If it keeps running it can be because the flood switch has activated. Take off the lower panel under the door. Look inside to see if there is any water on tray. If so then dry it off and pump will stop running but you will need to find why it leaked. The flood switch is a microswitch on a brown plastic holder with a piece of polystyrene under it. The polystyrene float will rise up on the water and trigger the microswitch. The switch itself may be stuck on check that as well.

Lincoln Appliance NZ, April 2012
link Click here to see other fixes for Fisher & Paykel.