home Fix label Kitchen Appliances label_important Dishwashers category Fisher & Paykel

Fisher & Paykel 920 Model displaying error code C?

Hello
Our Fisher & Paykel Dishwasher 920 Model is displaying error code C.
This is not listed in the instruction manual. Any idea how to fix this? I have turned the power off at the wall switch but the error code reappears when switched back on.

Lisa, May 2012

home Fix label Kitchen Appliances label_important Dishwashers category Fisher & Paykeldone

Sorry I checked again & there is a C that can appear but only when it is in the special diagnostic mode for the technician. It is not an error code, just tells him what part of the test he is in. It should clear if you turn power off at wall & pull plug out of wall socket for a few minutes. If it reappears when you power up then board is faulty.

Lincoln Appliance NZ, June 2012

There is no such error code even in the technician's service manual. They are all F1 F2 F3 etc or U1 U2. If digital display is saying C then board must be faulty and you have to replace the main controller board.

Lincoln Appliance NZ, June 2012

link Click here to see other fixes for Fisher & Paykel.

Fix Fault - Kitchen Appliances

home label Kitchen Appliances label_important Dishwashers

home Fix label Kitchen Appliances label_important Dishwashers category Fisher & Paykel

Fisher & Paykel 920 Model displaying error code C?

I can answer this question...

Fisher & Paykel 920 Model displaying error code C?

I can answer this question ...

Fisher & Paykel 920 Model displaying error code C?

Why is my SMEG Dishwasher showing E1 without water in tray?

Hotpoint H-Dish 500 stuck in demo?

Kenwood dishwasher kdw45w16?

Dishwasher is just cycling though the display - demo mode?

Dishwasher fault?

Clear E1 error code on smeg dishwasher with no water or leak?

Miele G1222 series dishwasher F14 error message?

Remove plinth from AEG dishwasher?