home Fix label Security Systems label_important Home Alarm Systems category Honeywell

Honeywell accenta g3?

Our alarm keeps going off when we turn our bedroom light on, the alarm's ok if we don't use the light.Don't know what's wrong or where to start, i'am thinking of switching the alarm off altogether, can you help?

Mitch, September 2012

home Fix label Security Systems label_important Home Alarm Systems category Honeywell

done

Airing cupboard!, that will reduce the life expectancy of your battery, replace the battery mate.:)

e manno, September 2012

The alarm is in the airing cupboard in our bedroom?.

Mitch, September 2012

Where's the alarm panel situated?

e manno, September 2012

Thanks all but the battery was replaced 3yrs ago, just tried it without the three spot bulbs fitted to the fixture and it seems fine.

Mitch, September 2012

2.1Ah for the mini

Upto 7Ah for the std G3

Just replace with same rating already fitted, it reflects on your systems ma draw, but have the lighting circuit checked over first :)

e manno, September 2012

Get an electrician in just to check the loop, if all's well then replace the battery inside the control panel.

Ask the electrician if he would replace the battery for you,

better safe than sorry :)

e manno, September 2012

You need a new battery in the alarm box. a 2.9ah 12volt dc battery.

khemist, September 2012

Do you have a sensor in the bedroom, if not, something to do with the light or cct, what type of light and light fitting, basic lamp, is is low power one, try changing it, something else, fan or other etc, could be causing interferance with some sensor, which alarm cct does it say is giving the problem check the sensor on that cct.

SD, September 2012

link Click here to see other fixes for Honeywell G3.