how can I replace the Control Panel light on my Creda Concept Solar Plus

Roger Hemming, November 2006

Switch off power.Remove each side panel by removing 3 screws on rear edge & pulling panel rearwards off 3 spring clips on front edge.Remove 2 screws from under rear edge of ceramic top & 1 screw each side at front of ceramic top.Lift the top carefully & move it rearwards about 6" to access a metal cover at rear of control panel. Remove screws & lift off this cover to access the 21" strip light . Reassemble by reverse

Geoff Griffiths, June 2007

turn all power off ,lift ceramic top 2 screws on side near front.prop top up (like car bonnet).take all knobs off,lift off glass front .the flourescent tube is behind control rotary display it has a plug at each end.

gordon, December 2006