Put this on as many don't know you *can/could over-ride the PIR to get light to stay on.

PIR controlled lighting can be turned on manually by operating the main light control switch ' on off on ' which overrides the PIR, then the light should stay on. Turn this mode off simply by turning off the control switch turn it back on and the light will come on but will turn off once PIR senses take over light control. Someone will probably contest this but this is how I get mine to stay on then reset to PIR. *Always check with supplier if the light has this mode if needed.

bob, November 2012

most pirs cont, lights have this facility as has been stated,turn power off then turn it back again,the pir will be over ridden,when you turn the switch off agauin,in about 10 or 20 secs,when u turn the switch on,the light will revert to pir control

mm, November 2012