Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

aeg oko-favorit 40300?

The water does not get hot' any help would be most helpful. Many thanks.
Alan Goodyear, November 2013
test the element with a multimeter.should be around 29ohms if good then if that is OK check the main pcb in the fascia panel for bad solder joints on the pcb heater relay or burnt tracking

CK, November 2013
link Click here to see other fixes for AEG Oko.