home Fix label Heating label_important Home Heating Systems category Potterton

Potterton Performa 30 HE flame failure?

The burner lights, then the flame goes out, then the flame failure LED comes on. Any ideas?

Jeremy Lewis, September 2014

home Fix label Heating label_important Home Heating Systems category Pottertondone

Of course it may not be the thermocouple at all - it may be the control electronics failing to properly recognise the signal from the sensor.

It will be very unlikely to be both of these things - very, very unlikely.

Pope's Private Secretary, September 2014

I would guess that the device that detects the heat from the flame (themocouple) is defective - the control electronics think that there is no flame - light the flame failure led and shut things down.

A specialist engineer may be your best approach.

Good luck...

Ex Pope Benedict, September 2014

link Click here to see other fixes for Potterton.

Fix Fault - Heating

home label Heating label_important Home Heating Systems

home Fix label Heating label_important Home Heating Systems category Potterton

Potterton Performa 30 HE flame failure?

I can answer this question...

Potterton Performa 30 HE flame failure?

I can answer this question ...

Potterton Performa 30 HE flame failure?

Fan tries to run every 15 seconds then stops immediately?

Boiler cycle?

F40 fault?

How can i mend my baxi combi 105a?

Morco gb 24?

Firebird super Q 50/82?

Vaillant F22 fault?

Boiler problem?