David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Click here to ask your question

f&p Washing machine keeps stopping on the drain cycle?

the pump pumps water then stops and all lights go off no button works if I turn it off at the wall and wait for 5mins and then turn on it resumes draining water and then after a short time stops. when it gets to spin it works ok
mike, October 2016
I had the same issue. Take the lower front panel off and unscrew the pump cleanout from the pump (its in really tight). Clean out the basket and replace. Run a rinse and spin cycle to clean the line. Mine works like new now.

tcrom2, October 2016
Like THE last poster

Bad grammer,try going to some classes., October 2016
Have been fixing these machines for years and have seen this problem many times. Think I am far more credible than plonkers like last poster.

Lincoln Appliance NZ, October 2016
You don't know what you are talking about Lincoln Appliance NZ, don't listen to him mike. Follow my advice

Buy a new washing machine, October 2016
Sounds like drain pump is over heating. Power will shut off until pump cools down. Remove and inspect the pump. It will have a burnt smell if I am right.

Lincoln Appliance NZ, October 2016