I Have singer and the presser foot lifter won't work

Diane Bancroft, March 2018

had a bad jam and had to remove the bobbin holder. Then I had to leave town for a while. When I returned I couldn't get the bobbin holder back into the machine. The forked part rides too high. If I push it under the bar, the other side won't go in. The book is NO help. It shows a bad picture with three directions that are numbered 1, A, and B. The directions say to refer to #3 picture, which isn't there. I am so stuck.

Carla Kelly, June 2019

had a bad jam and had to remove the bobbin holder. Then I had to leave town for a while. When I returned I couldn't get the bobbin holder back into the machine. The forked part rides too high. If I push it under the bar, the other side won't go in. The book is NO help. It shows a bad picture with three directions that are numbered 1, A, and B. The directions say to refer to #3 picture, which isn't there. I am so stuck.

Carla Kelly, June 2019

Have you checked it is correctly assembled and that nothing is jamming it?

The manual may help:

https://www.sewingpartsonline.com/instruction-manual-singer-hd110.aspx

90879uyj, March 2018